Energy meter IE38Mx
Energy meter IE38Mx
Energy meters IE38Mx are intended for energy measurements in a three-phase electrical power network and can be used in residential, industrial, and utility applications. The meter measures energy directly in 3-wire and 4-wire networks according to the principle of fast sampling of voltage and current signals. The meters are MID approved.
It is a compact three-phase direct connected DIN-rail mounting meter.
Features class B for active energy and class 2 for reactive energy.
- IE38MS - MID (IR, NFC) 2xS0, DUAL TARIFF, 80 A, 3-PM
- IE38MM - MID (IR, NFC, M-bus) S0, DUAL TARIFF, 80 A, 3-PM
- IE38MD - MID (IR, NFC, Modbus) S0, DUAL TARIFF, 80 A, 3-PM
- Compact three-phase direct connected DIN-rail mounting meter
- Class B for active energy and Class 2 for reactive energy, MID approved
- Maximum current 80 A (Imax)
- Variants: 2 x S0, S0 + RS485 (Modbus), S0 + M-Bus
- Tariff input
- Side IR communication for add-ons
- NFC for easy setting and reading
- 70°C ambient operational temperature
- Three phase direct connected DIN-rail mounting meter
- Class B for active energy according to EN 62053-21 and MID approval for class B according to EN 50470-3
- Class 2 for reactive energy according to IEC 62053-23
- Bidirectional energy measurement (import/export)
- Maximum current 80 A (Imax)
- Display segment Matrix LCD
- Multifunctional front red LED
- IR serial communication
- Measurements of:
- power (active/reactive/apparent)
- energy (active/reactive/apparent, each phase and total)
- voltage for each phase
- current for each phase
- phase to phase voltage
- phase to phase angle
- frequency
- power factor (for each phase and total)
- power angle (for each phase and total)
- active tariff
- THD of voltage
- THD of current
- 2nd multifunction pulse output (valid only for IE38MS)
- Modbus RS485 Serial communication (valid only for IE38MD)
- M-bus Serial communication (valid only for IE38MM)
- Tariff input (230 V AC)
- Tariff management (up to 6 tariffs manageable via communication)
- -25°C - 70°C ambient operation temperature
- Limit control (Alarm) function can give info about exceeded conditions and trigger BICOM switch through IR communication
- Sealable terminal cover
- DIN-rail mounting according to EN 60715
- 3 DIN modules width
