Power monitoring device MC7x4 is designed for environments where beside measurement of three-phase electrical power network additional analogue or digital measurements/controls must be made without additional hardware (PLC, OPLC).
This power monitoring devices are intended for measuring, analysing and monitoring single-phase or three-phase electrical power network in electricity distribution and energy production companies, utilities, dwellings, industry, ...
Energy meters IE14xx (also MID certified models) are intended for energy measurements in single-phase electrical power network and can be used in residential, industrial, utility and EV-charging applications.
The SG series of smart gateways are intended to connect various equipment into communication network. The gateway has built-in two optical (IR) communication ports and the RS485 serial communication with the MODBUS protocol.
The ZQ 1207 or ZQ 1208 two-system frequency meter is used for measuring frequencies in two networks. The front frames of all the instruments measure 96x96 mm. Ship versions of the ZQ 1207 meters are available on request.
Reed frequency meters are intended for measurement of frequencies in the range from 45 Hz to 65 Hz. Two-system reed frequency meters are intended for measurement of two frequencies in the system for synchronisation. Their class is 0.5.
Meters with a moving coil and a rectifier are intended for measurement of AC currents or voltages in the frequency range from 40 Hz to 65 Hz (higher frequency range on request), where low meter consumption is required.
Meters with a moving iron are intended for measurement of AC currents or voltages of frequencies from 15 Hz to 100 Hz. They measure rms values independently on the signal form of current or voltage. The scale is interchangeable. The accuracy ...
Combined bimetal maximum current meters are provided with a built-in bimetal system and a system with a moving iron. The meters are intended for testing momentary and thermal load of transformers, cables, electrical machinery, etc.
Digitalni panel DM 206 – ampermeter meri natančno vrednost napetosti katerekoli linije (AC + DC) v pravem RMS-u. Vsako linijo lahko merite med 0...9999 A. Če števec odčita več kot 9999 A, se prikaže sporočilo o napaki.
DM 308 - Digital Panel Ampermeter measures very accurately, the current value of the any line (AC+DC) in true RMS. Any line can be measured between 0…9999 A. When the reading excesses 9999 A, it shows Err fault message.
The 07038.00 is designed for measuring DC currents and is suitable for exercises in which pupils use galvanic couples, batteries and low voltage sources. We suggest one instrument for work of two pupils.
The 07037.00 is designed for measuring small DC voltages and is suitable for exercises in which pupils use galvanic couples, batteries and low voltage sources. We suggest one instrument for work of two pupils.
The 07036.00 is designed for measuring AC/DC currents. Together with our 07035.00 (link at 07036.00) voltmeter, it is adequate for basic and advanced experiments in the electronics and electro-technical field.
The 07035.00 is designed for measuring AC/DC voltages. With our ammeter 07036.00 (link at 07036.00) it makes a voltmeter set, suitable for basic and advanced electro-technical and electronics experiments at.
A cookie is a small piece of data sent from a website and stored in a user's web browse while a user is browsing a website. When the user browses the same website in the future, the data stored in the cookie can be retrieved by the website to notify the website of the user's previous activity
A visit to a this page could generate the following types of cookie.
Strictly necessary cookies
These cookies are essential in order to enable you to move around the website and use its features, such as accessing secure areas of the website. Without these cookies services you have asked for, like shopping baskets or e-billing, cannot be provided.
2. Performance cookies
These cookies collect information about how visitors use a website, for instance which pages visitors go to most often, and if they get error messages from web pages. These cookies don’t collect information that identifies a visitor. All information these cookies collect is aggregated and therefore anonymous. It is only used to improve how a website works.
3. Functionality cookies
These cookies allow the website to remember choices you make (such as your user name, language or the region you are in) and provide enhanced, more personal features. For instance, a website may be able to provide you with local weather reports or traffic news by storing in a cookie the region in which you are currently located. These cookies can also be used to remember changes you have made to text size, fonts and other parts of web pages that you can customise. They may also be used to
provide services you have asked for such as watching a video or commenting on a blog. The information these cookies collect may be anonymised and they cannot track your browsing activity on other websites.
4. Targeting and advertising cookies
These cookies are used to deliver adverts more relevant to you and your interests They are also used to limit the number of times you see an advertisement as well as help measure the effectiveness of the advertising campaign. They are usually placed by advertising networks with the website operator’s permission. They remember that you have visited a website and this information is shared with other organisations such as advertisers. Quite often targeting or advertising cookies will be linked
to site functionality provided by the other organisation.
Cookies can be managed via the web browser settings. Please, see you browser help how to manage cookies.
On this site you can always turn cookies on/off on menu item “Cookie Management”.